SPECIFICATIONS
Battery Included: Yes
Choice: yes
Hign-concerned Chemical: None
Is Smart Device: No
Item Type: Training Collars,Training Collars
Material: Plastic
Origin: Mainland China
Target Pet: Dog
Type: Dogs
whether electrical: YES
[xlmodel]-[custom]-[44528]
Specification:
Model: Electric Remote Control Dog Training Collar
Collar size: max adjustable length is up to 67cm (For small,medium and large dogs)
Range: About 800 Meters (without any disturbance)
AC Input: 100 – 240V, 50 / 60Hz
DC Output: 5V, 0.5A
Remote control battery voltage: 3.7V
Receiver waterproof level: IP67
Battery type: lithium-ion battery (built-in)
Receiver Transmitter charging time: 4 hours
Receiver Transmitter standby time: about a week
Feature:
1, Receiver IP7 degree waterproof, high quality TPU material, can swim, take a bath, dive.
2, With blue backlight screen: can be used at night .
3, 3 training modes: shock/vibration/sound.
4, Long-distance remote control: the remote distance is 800m (without any disturbance) .
5, Adjustable levels: levels of vibration and shock are adjustable from 1 to 99, and you are advised to try levels gradually to find the proper one when using this pet training system for the first time
6, Auto power save: automatic standby mode and memory functions.
7, 3 channels: there are 3 signal channels on the remote transmitter, and it can control 3 receivers of the same model.
[xlmodel]-[photo]-[0000]















How to use the trainer
Pair the remote and receiver
1, Press the shock button or vibration button to turn on the remote.
2, Choose a Channel 1 or 2 or 3 by press the CH button.
3, Press the vibration button, adjust the level by press – OR + button, make sure the level above 01
4, Press the power button of the receiver by 3 seconds, you hear a sound like Bee-, and the indicator light is flashing. Now quickly, press the vibration button or shock button within 10 seconds after the sound Bee-, you can hear a sound Bee~ again, that means the pairing successful.
5, If you Have 2 or 3 Receivers, just choose the different channel and pair as above same steps.
Test the Training Collar set( after paired successfully)
1, Test the Shock function
Take out the test bulb and put it on the Receiver's contact point press the shock button(make sure the level above 001) the test bulb will be on.
2, Test the vibration funciton
Press the Vibbration button(make sure the level above 001) the receiver will vibrate.
3, Test Sound Function and light function
Press the sound/light button, don't adjust the level, the receiver sound Bee~ or flash light. It's 2 in1 button, you could switch the sound or light mode as bellowing step: press and holding the button, don't release, then press the 1/3 button(Channel button), you could find the mode switching in the screen.


















Real customer reviews